Connect to Wireless display

Connect to Wireless display

The TVs at the Admin building have wireless display capabilities.
  1. Right click on your desktop and select "Display Settings"
  2. Scroll down on the "Display" setting screen to the "Multiple displays" section and click "Connect to a wireless display"
  3. A "Connect" side bar will open on the right side of you screen.  Select "85" QLED" This step may take a few minutes.
  4. The TV will ask to allow your device.  Using the remote click "Allow"
  5. The TV may start in a PIP (Picture in picture) mode.  Using the TV remote, navigate to your display and click the center button the remote. Select "Full screen".
  6. You may need to adjust the Multi display setting.  For this see the document "Multiple Monitors"
    1. You may need to adjust the Scale
      1. Select the TV in your display setting.
      2. Scroll down to "Scale and layout". Select the percentage that looks best for your presentation.
  7. If you do not used the TV wireless display it may time out and you will need to repeat this process.

    • Related Articles

    • Reserving a room in an Outlook Meeting

      Many of the Woodhouse Conference rooms are setup as a resource in Outlook so you can book the room when you create a meeting. All conference rooms at the Admin building are setup to be scheduled. By scheduling the room with your meeting, you ensure ...

    • GM Techline Connect gets error "this application requires a java runtime environment 1.8.0"

      After an update to GM Techline Connect, you may receive an error message stating "this application requires a java runtime environment 1.8.0" when trying to run Techline Connect. You need the IT department to install this version of Java but you will ...

    • Multiple Monitors

    • Oki Data Factory Reset

      Power off Oki Data. Hold down "SEL" and "SHIFT" buttons. While still holding SEL and SHIFT, power the Oki Data back on. Release SEL and SHIFT when the display screen reads "Initializing SW." Printer will reboot, and display "data present." Insert a ...

    • GoTo Phone Star Codes

      Click this link to be directed to GoTo support page. Supported star codes - GoTo Connect Support