An OKI 8480 by default will make a buzzing noise if there is a print job in queue. To disable this, perform the following steps:
SEL BUTTON HAS TO BE TURNED OFF FOR THIS TO WORK
On the printer, press SHIFT and MODE at the same time to put the printer into Menu Mode (The SEL light will be blinking and the display will say Printer Control)
Hold down SHIFT and press LF until you reach the Hardware group.
Power off Oki Data. Hold down "SEL" and "SHIFT" buttons. While still holding SEL and SHIFT, power the Oki Data back on. Release SEL and SHIFT when the display screen reads "Initializing SW." Printer will reboot, and display "data present." Insert a ...
There were 2 OkiData Windows print queues. Switched the P Session to the correct one and it worked. This usually happens when the USB cable moves to a different port.
With the new PrinterLogic system for printing, you can change your default printer yourself. 1. go to the search bar in the bottom left and type in printers 2. Select printers & scanners 3.Select the printer that you would like to be the default and ...
Search for printer on search bar as shown by arrow and select printers & Scanners. Next , find your printer and left-click on it. Select “Remove Device”. It will ask you “Are you sure” Click yes and restart you machine.
If a printer gets turned off it will need to have the logos reloaded. You can do this by going to the 80. System Tools option. From there select "Reload Logos to Printer". Once in the "Download Laser Forms" screen find your printer and select "1" in ...